| All Auto Backwashing Tannin Filter systems have the following components: (unless otherwise specified) |
- Specified resin tank size with 1" riser tube and top distributor basket
|
- Specified amount of Purolite A850 Tannin resin
|
- Fleck 2510 3/4" Timer Control valve (Fleck 2510SXT optional at checkout) with your choice of one of the following six connections: 3/4" or 1" Noryl Yoke, 3/4" or 1" Stainless Steel Yoke, 3/4" or 1" Stainless Steel Bypass Valve
|
- 15x17x36 Rectangular or 18x33 Round Brine Tank with grid, 2310 float assembly and safety overflow
|
- Fleck valve-to-brine tank tubing
|
- The only item you have to supply is the 1/2" inside diameter drain line from the valve to your drain.
|
- NOTE: Tannin Filter systems will not work well if there is iron present in the incoming water. Iron removal should occur prior to use of a Tannin Filter system. In addition, water hardness must be less than 10 grains per gallon and tannin levels not greater than 3 ppm.
|
| General Information on how to estimate the approximate level of Tannins in your water: |
| Concentration in Parts per Million (ppm) |
Water Color |
| 0.0 - 0.5 |
Faint tinge of yellow |
| 0.5 - 2.0 |
Darker golden yellow (ginger ale) |
| 2.0 - 3.0 |
Light tea color |
| 3.0 - 5.0 |
Dark tea color |
Prices shown are for the smallest size unit shown. Optional sizing available.